If at any time you’re away from the office and wants a secure access to the network you have, the things that should be done is to set up a Virtual Private Network, or better known as VPN. With this you can connect via the Internet safely and be able to access your files simultaneously without any worries.
But as we know is that it is still considered a VPN server resources are very expensive. Even having a VPN is merely a dream for people with scant financial capital. At this time tips have good news for you who want to set-up a VPN without the capital even though, because we are not going to use the help of specific software. In fact you do not have to buy a VPN server, and here we will just use the default features that are already available on your computer, especially Windows users.
In this tutorial, I will simulate the use of a VPN server on Windows 7 or Vista, which can connect with Windows XP, Vista, or 7 following steps:
- ZenMate Free VPN 3 Months Premium
- PD Proxy Premium Account for 1 year free Dec 2017
- Tips to Protect Your WiFi Router From Hacking
How to Set Up Your Own VPN Without Software
1. Set up access to your IP
As we know that the VPN network connected together. you must be careful with the subnet and IP address so that there is no conflict, on the network of your VPN server hosting. Change if you are used to using IP Office to a different subnet. such as 192.168.51.1, 192.168.52.1, and so forth using the usual standard for IP routers that you use, such as 192.168.50.1
2. Create a VPN connection is included in Windows you’re using
To configure Windows VPN server, you must do what is exemplified by Microsoft Windows in menu “help” in creating connections to enter. This will be the host of the VPN server or you later. Among other things that you would define which users will be able to connect to your VPN. Follow the steps below:
a. Right-click the icon Network in the system tray (taskbar) and select Open Network and Sharing Center.
b. Click Manage network connections (if you are using Windows Vista) or Change adapter settings (if you are using Windows 7).
d. Choose who you want to give access to your Virtual Private Network or create a specific account by clicking Add someone. when you’re done click Next.
f. As shown in (Figure 4), select the protocol you want to enable this connection. Then select Internet Protocol Version 4 (TCP / IPv4) so you can freely adjust each connected user on your network. You are able to remote users to a variety of interests such as accessing files, share files, print files, etc, by clicking File and Printer Sharing for Microsoft Networks. then Allow access .
g. When finished click Close .
3. Next you will be required to access the properties of the network connection that you just created to determine each client’s IP address range of your VPN server:
a. Go to the menu Network Connections on your Windows, double-click Incoming Connections .
b. Select the tab Networking , and then double-click Internet Protocol Version 4 (TCP / IPv4) .
c. Select Specify IP addresses and then enter the IP address range beginning and end are allowed to reach by your local subnet. Which is certainly not in conflict with the DHCP range. For instance, if your router IP is 192.168.50.1, then you should enter the IP range between 192.168.50.50 to 192.168.50.59 as shown in (Figure 5). Thus your server will be able to support 10 clients. Or if you want a client that sets its own IP. Check writing Allow calling computer to specify its own IP address .
d. Click OK in the dialog box to save the changes.
Such tips from me to do the initial set-up VPN without using any software.